LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Probe GT, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.2L 4-CYL - VIN [C] & 2.2L 4-CYL Turbo - VIN [L] >> Lubrication >> Oil Pump >> Reassembly & Installation

Reassembly & Installation

  1. If seal was removed from oil pump housing, use Seal Installer (T88C-6701-AH) and press to install seal. Apply bead of silicone sealant to pump sealing surfaces.
    CAUTION: DO NOT allow sealant to enter oil pump outlet ports.
  2. To install, reverse removal procedure using new "O" ring. Coat new "O" ring and seal lip with engine oil prior to installation.
scientia non olet · About LEMON Manuals