Valves & Valve Springs Specifications
VALVES & VALVE SPRINGS SPECIFICATIONS
| Application | In. (mm) | ||
|---|---|---|---|
| Intake Valves | |||
| Face Angle | 45° | ||
| Head Diameter | 1.276-1.283 (32.41-32.58) | ||
| Stem Diameter | .2744-.2750 (6.969-6.985) | ||
| Exhaust Valves | |||
| Face Angle | 45° | ||
| Head Diameter | 1.335-1.343 (33.90-34.11) | ||
| Stem Diameter | .2742-.2748 (6.965-6.979) | ||
| Valve Springs | |||
| Intake | |||
| Free Length | 1.95 (49.5) | ||
| Minimum | 1.90 (48.3) | ||
| Out-of-Square | .07 (1.7) | ||
| Exhaust | |||
| Free Length | 1.98 (50.4) | ||
| Minimum | 1.94 (42.9) | ||
| Out-of-Square | .07 (1.7) | ||