LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Probe GT, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel - Standard >> Testing >> Seat Belt Warning Light Short Check 1

Seat Belt Warning Light Short Check 1

  1. Disconnect Central Processing Unit (CPU) 14-pin connector. CPU 14-pin connector is located at joint box near left kick panel. See Figure .
  2. If seat belt light goes off, proceed to SEAT BELT WARNING LIGHT SHORT CHECK 2  . If seat belt warning light does not go off, repair Brown/Black wire between gauges and CPU.
scientia non olet · About LEMON Manuals