LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Probe GT, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel - Standard >> Testing >> Fuel Gauge Continuity Check 2

Fuel Gauge Continuity Check 2

  1. On non-turbo models, ground Black/Blue wire at fuel tank sending unit 6-pin connector. On turbo models equipped with Vehicle Maintenance Monitor (VMM), ground Black/Light Green wire. See Figure . Fuel tank sending unit 6-pin connector is located on front of fuel tank.
  2. Observe fuel gauge reading. If fuel gauge reads correctly, repair Black wire between fuel tank sending unit and ground. If fuel gauge does not read correctly, replace fuel tank sending unit.
scientia non olet · About LEMON Manuals