LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Probe GL, Standard >> Repair and Diagnosis >> Steering >> Steering Column >> Removal & Installation >> Contact Assembly R & I >> Removal (Crown Victoria, Grand Marquis, Mark Vii, Mustang, Sable, Taurus & Town Car)

Removal (Crown Victoria, Grand Marquis, Mark Vii, Mustang, Sable, Taurus & Town Car)

  1. Remove steering wheel. See STEERING WHEEL  under REMOVAL & INSTALLATION. Remove right and left lower moldings from dash panel by unsnapping from retainer.
  2. Remove lower trim panel from dash panel. Remove lower shroud. See Figure and Figure. Disconnect clockspring electrical connector from column harness.
  3. If contact assembly is to be re-used, tape clockspring stator and rotor to prevent internal damage to clockspring. See Figure. Remove contact assembly.