LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Probe GL, Standard >> Repair and Diagnosis >> Steering >> Steering Column >> Removal & Installation >> Back-Up Power Supply (Vehicles With Air Bag) >> Removal (Crown Victoria & Grand Marquis)

Removal (Crown Victoria & Grand Marquis)

  1. Disconnect battery ground cable. Remove headlight switch knob and retaining nut. Remove left and right instrument panel moldings.
  2. Remove 12 upper and lower instrument panel finish panel retaining screws and finish panel. Remove 2 bolts attaching steering column opening cover and pad assembly to instrument panel. Remove cover.
  3. Remove 2 screws and push pin retaining instrument panel insulator. Remove insulator.
  4. Disconnect back-up power supply electrical wiring connector mounted to EEC module bracket. Remove screws attaching EEC module bracket assembly and remove assembly. Depress bracket retaining tabs and remove power supply.
scientia non olet · About LEMON Manuals