LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Festiva L >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Removal & Installation >> Fuel Sending Unit

Fuel Sending Unit

  1. Remove rear seat. Remove carpet hold-down pins and lift carpet for access to sending unit access plate. Remove access plate screws.
  2. Lift access plate and disconnect sending unit wiring. If fuel pressure is present in system, start engine and run until engine stalls. Turn ignition off. Disconnect fuel line at sending unit. Remove sending unit attaching screws. Remove sending unit. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals