LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Escort GT >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Brake System Specifications >> Disc Brake Specifications

Disc Brake Specifications

DISC BRAKE SPECIFICATIONS - FRONT

Application In. (mm)
Disc Diameter
Continental 10.16 (258.1)
Cougar & Thunderbird 10.87 (276.1)
Crown Victoria, Grand Marquis, & Town Car 11.08 (281.4)
Escort, Tempo & Topaz 9.25 (235.0)
Mark VII 10.91 (277.1)
Mustang (2.3L) 10.08 (256.0)
Mustang (5.0L) 10.91 (277.1)
Probe (1)
Sable & Taurus 10.16 (258.0)
Lateral Runout
Continental .002 (.05)
Probe .004 (.10)
All Others .003 (.08)
Parallelism
Continental .0004 (.010)
Probe .001 (.03)
All Others .0005 (.013)
Original Thickness
Continental 1.02 (26.0)
Cougar, Sable, Taurus & Thunderbird 1.024 (26.01)
Crown Victoria, Grand Marquis, Mark VII & Town Car 1.03 (26.2)
Escort, Tempo & Topaz .945 (24.0)
Mustang (2.3L) .870 (22.10)
Mustang (5.0L) 1.03 (26.2)
Probe (1)
Min. Refinish Thickness
Probe .890 (22.7)
Continental .896 (22.75 mm)
All Others (2)
Discard Thickness
Continental .974 (24.74)
Cougar & Thunderbird .935 (23.75)
Crown Victoria, Grand Marquis, Mark VII & Town Car .972 (24.69)
Escort, Tempo & Topaz .882 (22.4)
Mustang (2.3L) .810 (20.57)
Mustang (5.0L) .972 (24.69)
Probe .860 (22.0)
Sable & Taurus .974 (24.74)
(1) Information not available from manufacturer.
(2) Minimum refinish is marked on each rotor.
DISC BRAKE SPECIFICATIONS - REAR

Application In. (mm)
Disc Diameter
Continental, Cougar & Thunderbird 10.16 (258.1)
Mark VII 11.31 (287.3)
Probe (1)
Sable & Taurus 10.09 (256.4)
Lateral Runout
Continental, Sable & Taurus .002 (.05)
Cougar & Thunderbird .003 (.08)
Mark VII & Probe .004 (.10)
Parallelism
Probe .001 (.03)
All Others .0005 (.013)
Original Thickness
Continental 1.02 (25.9)
Probe (1)
All Others .945 (24.00)
Minimum Refinish Thickness
Probe .345 (8.762)
All Others (2)
Discard Thickness
Continental .974 (24.74)
Cougar & Thunderbird .895 (22.73)
Mark VII .90 (22.75)
Probe .315 (8.0)
Sable & Taurus .90 (22.75)
(1) Information not available from manufacturer.
(2) Rotor is stamped with minimum refinish thickness.