Front Wheel Bearings - Cougar & THUNDERBIRD
NOTE:
Front wheel bearings are part of hub unit and require no maintenance or adjustment. If replacement is necessary, the hub/bearing assembly must be replaced as complete unit.
- Raise and support front of vehicle. Remove wheel and tire assembly. Remove 2 Torx bolts from brake caliper. Remove caliper and suspend by wire. DO NOT let caliper hang by brake hose. Remove rotor. Remove hub nut and hub, use pulley if necessary.
- To install, reverse removal procedure. Install new front axle wheel hub nut and tighten to 250 ft. lbs. (340 N.m).