LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Bronco II RWD, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Rotor Servicing >> Lateral RUNOUT

Lateral RUNOUT

  1. Tighten spindle nut to eliminate bearing end play. Ensure that rotor can be turned. Install and tighten lug nuts. Attach dial indicator on suspension, with indicator tip on face of rotor.
  2. Set dial indicator to zero, slowly turn rotor, and note high and low readings on dial. Runout must not exceed specifications. See DISC BRAKE SPECIFICATIONS  . Resurface or replace rotor as required.
scientia non olet · About LEMON Manuals