LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Bronco II 4WD, Standard, M5OD-R1 >> Repair and Diagnosis (Single Page) >> Suspension >> Front Suspension >> Suspension - Front (4WD Coil Spring) >> Removal & Installation >> Radius Arm >> Removal (Bronco & F150)

Removal (Bronco & F150)

  1. Remove coil spring. See COIL SPRING  in this article. Loosen axle pivot bolt. Remove spring lower seat and stud from radius arm.
  2. Remove radius arm-to-axle and radius arm bracket bolts. See Figure . Remove nut, washer and bushing from rear of radius arm at frame bracket. Move axle forward and remove radius arm.
scientia non olet · About LEMON Manuals