LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Bronco II 4WD, Standard, M5OD-R1 >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine Oil Pan Removal >> Removal & Installation >> 5.0L & 5.8L V8 >> Removal (Bronco & F150/350)

Removal (Bronco & F150/350)

  1. Remove fan shroud. Remove upper intake manifold. See appropriate article in ENGINES for upper intake manifold service.
    CAUTION: Fuel system is under pressure. Pressure must be released before disconnecting fuel system components. See FUEL PRESSURE RELEASE at beginning of this article.
  2. Remove front engine mount-to-frame nuts. On A/T models, disconnect oil cooler lines from radiator. On all models, disconnect exhaust pipes from exhaust manifold. Drain engine oil.
  3. Support transmission with jack stand and remove transmission crossmember. Remove oil pan bolts and lower oil pan. Remove oil pump bolts and pick-up tube nut. Lower oil pump assembly into pan. Remove oil pan.
scientia non olet · About LEMON Manuals