LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Bronco II 4WD, Standard, M5OD-R1 >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Master Cylinder (Except AEROSTAR) >> Removal

Master Cylinder (Except AEROSTAR): Removal

  1. Pump brake pedal several times to remove vacuum from brake booster. Disconnect Fluid Level Indicator (FLI) warning lamp wire from plastic reservoir. Disconnect hydraulic lines from master cylinder.
  2. Remove nuts attaching master cylinder to booster. Remove master cylinder.
scientia non olet · About LEMON Manuals