LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Bronco II 4WD, Standard, M5OD-R1 >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Master Cylinder (AEROSTAR) >> Removal

Master Cylinder (AEROSTAR): Removal

  1. Disconnect wiring harness from fluid level indicator switch in reservoir. Disconnect brake lines from cylinder body. Remove mounting nuts attaching master cylinder to booster.
  2. Use care while removing master cylinder from booster not to scratch the exposed primary piston. Discard fluid from master cylinder.
scientia non olet · About LEMON Manuals