LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1990 >> Bronco II 4WD, Standard, M5OD-R1 >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Overhaul >> Master Cylinder (Except AEROSTAR) >> Reassembly

Master Cylinder (Except AEROSTAR): Reassembly

  1. Lubricate all components including cylinder bore with clean brake fluid. Install plastic reservoir with new grommets if necessary.
  2. Carefully insert secondary and primary piston assemblies into master cylinder bore. Depress primary piston and install snap ring in groove.
scientia non olet · About LEMON Manuals