LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1989 >> Tempo Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.3L HSC 4-CYL - VIN [X] & 2.3L HS0 4-CYL - VIN [S] >> Removal & Installation >> Cylinder Head >> Inspection

Cylinder Head: Inspection

Cylinder head warpage limit is .003" (.08 mm) in any 6". Overall cylinder head warpage is less than .007" (.18 mm). Do not machine more than .010" (.25 mm) from original cylinder head thickness. Clean and tap cylinder head bolt holes in cylinder block.

NOTE: Cylinder head bolts on intake/exhaust side are longer than spark plug side of cylinder head.
scientia non olet · About LEMON Manuals