LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1989 >> Tempo Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.3L HSC 4-CYL - VIN [X] & 2.3L HS0 4-CYL - VIN [S] >> Overhaul >> Piston & Rod Assembly

Piston & Rod Assembly

Ensure pistons and rods are installed in cylinder from which they were removed. Ensure notch on piston faces front of engine. Oil hole in rod and notch on piston must be in proper position. Refer to Fig 1.

Fig 1: Piston & Rod Alignment
G55099Courtesy of FORD MOTOR CO.
NOTE: No ring gap spacing procedure is given by manufacturer.
scientia non olet · About LEMON Manuals