LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1989 >> Tempo Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.3L HSC 4-CYL - VIN [X] & 2.3L HS0 4-CYL - VIN [S] >> Engine Cooling >> Water Pump >> Removal & Installation

Removal & Installation

Disconnect negative battery cable and drain cooling system. Remove accessory belts. Remove water pump inlet tube. Remove water pump retaining bolts. Remove water pump and gasket. Clean gasket mating surfaces. Position new gasket and water pump on engine block. To complete installation, reverse removal procedure.

NOTE: For information on cooling system capacity, see ENGINE COOLANT SPECIFICATIONS article.
scientia non olet · About LEMON Manuals