LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1989 >> Probe GT >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.2L 4-CYL - VIN [C] & 2.2L 4-CYL Turbo - VIN [L] >> Removal & Installation >> Intake Manifold >> Installation

Intake Manifold: Installation

To install, reverse removal procedure using new gaskets and "O" rings. Coat "O" rings with engine oil prior to installation. Ensure proper adjustment of all control cables.

Fig 1: Fuel Pump Relay Location
G106517Courtesy of FORD MOTOR CO.
Fig 2: Intake Manifold Components
G106518Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals