LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1989 >> Probe GL, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Torque Specifications

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Booster-to-Firewall Nuts 18-30 (24-41)
Brake Line-to-Master Cylinder 11-19 (15-26)
Brake Hose-to-Front Caliper
Continental, Cougar, Escort, Sable, Taurus, Tempo, Thunderbird & Topaz 30-45 (41-60)
LTD Crown Victoria, Grand Marquis Mustang & Town Car 20-30 (28-63)
Mark VII 17-25 (23-34)
Probe 16-22 (22-30)
Brake Hose-to-Rear Caliper
Continental 30-45 (41-61)
Mark VII 20-30 (27-41)
Probe 16-20 (22-27)
Thunderbird 18-24 (24-32)
Brake Line-to-Master Cylinder 10-18 (14-24)
Fluid Control Valve 8-10 (11-14)
Front Caliper Anchor Bracket Mounting Bolt
Probe 58-72 (78-98)
Front Caliper Locating Pins
Continental, Cougar, Escort, Sable, Taurus, Tempo, Thunderbird & Topaz 18-25 (25-34)
Ltd Crown Victoria, Grand Marquis, Mustang & Town Car 40-60 (54-81)
Mark VII 45-65 (61-88)
Probe 23-30 (31-41)
Fromt Wheel Bearing Nuts
Grand Marquis, LTD Crown Victoria & Town Car (1)
Mark VII & Mustang (2)
Master Cylinder-to-Booster Nuts 13-25 (18-34)
Master Cylinder-to-Firewall Nuts 13-25 (18-34)
Rear Caliper Anchor Bracket Bolt
Probe 33-49 (45-66)
Rear Caliper Anchor Plate Retaining Bolt
Continental 80-100 (109-136)
Mark VII 80-110 (109-149)
Thunderbird 80-100 (109-136)
Rear Caliper End Retainer
Mark VII 75-96 (102-130)
Rear Caliper Locating Pin
Mark VII 29-37 (39-50)
Rear Caliper Parking Brake Cable Lock Nut
Probe 14-21 (19-29)
Rear Caliper Parking Brake Lever Retaining Bolt
Mark VII 16-22 (22-30)
Rear Caliper Retaining Bolt
Probe 12-17 (16-23)
Rear Caliper Slider Pin Pinch Bolt
Continental 23-26 (31-35)
Thunderbird 18-24 (24-32)
Rear Wheel Bearing Nuts
Probe (3) 73-131 (99-178)
All Others (4)
Wheel Lug Nuts
Probe 65-87 (80-118)
All Others 85-105 (115-142)
(1) Tighten nut to 10-28 INCH lbs. (1.1-3.2 N.m)
(2) Tighten nut to 10-12 INCH lbs. (1.1-1.7 N.m)
(3) Always use new nut. Stake nut after tightening.
(4) Rotate drum and lightly tighten nut to seat bearing. Back off nut and tighten to 17-25 ft. lbs. (23-34 N.m).