LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1989 >> Probe GL, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Electronic >> Testing >> Temperature Gauge Check

Temperature Gauge Check

  1. Ground Yellow/Green wire at instrument cluster 8-pin connector. See INSTRUMENT CLUSTER 8-PIN TERMINAL IDENTIFICATION illustration. Instrument cluster 8-pin connector is located on right side of dash, near steering column.
  2. Observe temperature gauge reading. If temperature gauge reads cold, replace temperature gauge. If temperature gauge does not read cold, go to TEMPERATURE GAUGE CONTINUITY CHECK.
scientia non olet · About LEMON Manuals