LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1989 >> Probe GL, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Electronic >> Testing >> Seat Belt Warning Light Inoperative

Seat Belt Warning Light Inoperative

  1. Disconnect CPU connector. CPU 14-pin connector is located at joint box, above fuse panel near left kick panel. Ground pin "E" at CPU connector. See CPU CONNECTOR TERMINAL IDENTIFICATION illustration.
  2. If seat belt warning light comes on, go to SEAT BELT WARNING LIGHT CPU CHECK.
  3. If seat belt warning light does not come on, go to SEAT BELT WARNING LIGHT SIGNAL CHECK.
scientia non olet · About LEMON Manuals