LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1989 >> Probe GL, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Electronic >> Testing >> Seat Belt Warning Light CPU Check

Seat Belt Warning Light CPU Check

  1. Place jumper wire from pin-"E" to pin-"M" at CPU 14-pin connector. See CPU 14-PIN TERMINAL IDENTIFICATION illustration. CPU 14-pin connector is located at joint box, above fuse panel near left driver kick panel.
  2. If seat belt warning light comes on, replace CPU. If seat belt warning light does not come on, go to SEAT BELT WARNING LIGHT GROUND CHECK NO. 1.
scientia non olet · About LEMON Manuals