LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1989 >> Bronco II RWD, Standard, M5OD-R1 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Master Cylinder >> Installation

Master Cylinder: Installation

  1. Before installing master cylinder ensure power brake booster push rod adjustment is correct. See POWER BRAKE BOOSTER PUSH ROD  under ADJUSTMENTS.
  2. To install master cylinder, reverse removal procedure. Tighten master cylinder-to-booster nuts to 13-25 ft. lbs. (18-33 N.m). Bleed brake system.
scientia non olet · About LEMON Manuals