LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1989 >> Bronco II 4WD, Standard, M5OD-R1 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Master Cylinder >> Removal

Master Cylinder: Removal

  1. Pump brake pedal several times to remove vacuum from brake booster. Disconnect Fluid Level Indicator (FLI) warning lamp wire from plastic reservoir. Disconnect hydraulic lines from master cylinder.
  2. Remove nuts attaching master cylinder to booster. Remove master cylinder.
scientia non olet · About LEMON Manuals