LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1989 >> Bronco 5.0 N, Standard, M5OD-R2 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.0L V8 - VIN [N] & 5.8L V8 - VIN [H] >> Removal & Installation >> Camshaft >> Removal

Removal & Installation: Camshaft: Removal

  1. Remove timing chain front cover. See, in this article, REMOVAL under ENGINE FRONT COVER .
  2. Remove valve covers. Loosen rocker arm fulcrum bolts, and rotate rocker arms to one side. Mark and remove push rods and valve lifters for installation reference.
  3. Remove camshaft thrust plate and carefully pull camshaft out of engine. Use care to avoid damage to camshaft bearings and journals.
scientia non olet · About LEMON Manuals