LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1989 >> Bronco 5.0 N, Standard, M5OD-R2 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.0L V8 - VIN [N] & 5.8L V8 - VIN [H] >> Removal & Installation >> Camshaft >> Installation

Removal & Installation: Camshaft: Installation

  1. Oil camshaft journals and apply polyethylene grease to lobes. Carefully slide camshaft into position. Coat camshaft thrust plate with engine oil, and install with groove toward cylinder block.
  2. Lubricate lifters with engine oil and install. Lubricate rocker arms, fulcrum seats, valve stem tips and push rod ends with polyethylene grease before installing.
  3. To complete installation, reverse removal procedure and use new gaskets. Check and adjust valve clearance as necessary.
scientia non olet · About LEMON Manuals