Oil Pump: Removal

Remove oil pan and related parts. Remove oil pump inlet tube and screen assembly. Remove oil pump attaching bolts and intermediate drive shaft. Remove oil pump assembly.

NOTE: Oil pump is serviced as an assembly only. See OIL PUMP SPECIFICATIONS table. Replace assembly if not within specifications.

OIL PUMP SPECIFICATIONS

Application

In. (mm)

Rotor End Play

.004 (.10) Max.

Outer Rotor-to-Housing Clearance

.001-.013 (.03-.33)

Shaft-to-Housing Clearance

.0015-.0030 (.038-.076)

Relief Valve-to-Bore Clearance ⁽¹⁾

.0015-.0030 (.038-.076)

⁽¹⁾	Spring pressure is 10.6-12.2 @ 1.74 INCH Lbs.