LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1988 >> Tempo Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.3L HSC 4-CYL - VIN [X] & 2.3L OHC 4-CYL - VIN [S] >> Removal & Installation >> Camshaft Bearings

Camshaft Bearings

NOTE: Camshaft bearings are prefinished to size. No reaming is required for standard or .015" undersize journal diameters.

Remove engine, camshaft, crankshaft, and rear bearing bore plug. Using Camshaft Bearing Replacer (T65L-5260-A) and instructions, remove camshaft bearings. Install camshaft bearings with replacer. Ensure oil holes in bearings and block are aligned. Install new rear bearing bore plug. To complete installation, reverse removal procedure.

scientia non olet · About LEMON Manuals