Pistons, Pins & Rings Specifications
PISTONS, PINS & RINGS SPECIFICATIONS
| Application | In. (mm) | ||
|---|---|---|---|
| Piston Clearance | .0012-.0022 (.036-.056) | ||
| Pins | |||
| Piston Fit | .0002-.0005 (.005-.0013) | ||
| Rod Fit | Press Fit | ||
| Rings | |||
| Ring No. 1 & No. 2 | |||
| End Gap | .008-.016 (.203-.406) | ||
| Side Clearance | .002-.004 (.05-.10) | ||
| Ring No. 3 | |||
| End Gap | .015-.055 (.38-1.40) | ||
| Side Clearance | Snug Fit | ||