LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1988 >> Tempo Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.3L HSC 4-CYL - VIN [X] & 2.3L OHC 4-CYL - VIN [S] >> Engine Cooling >> Water Pump

Water Pump

Disconnect negative battery cable and drain cooling system. Remove thermactor pump and bracket assembly. Remove accessory belts. Remove water pump inlet tube. Remove water pump retaining bolts. Remove water pump and gasket. Clean gasket mating surfaces. Coat new water pump gasket with Perfect Seal Sealing Compound (B5A-19554-A) and position on engine block. To complete installation, reverse removal procedure.

NOTE: For further information on cooling system capacities and other cooling system components, see ENGINE COOLING SYSTEMS article in this section.
scientia non olet · About LEMON Manuals