Fuel Gauge (Sable With Tachometer Cluster): Installation

Carefully position pointer parallel to rectangular raised portion of dial.
CAUTION: Excessive rough handling could disturb calibration.
Guide pointer carefully through slot in main dial. Position gauge on mounting bosses and install mounting screws. Tighten screws to 7-12 inch lbs. (0.8-1.4 N.m).
On column shift vehicles, install transmission selector indicator. Install main dial assembly to cluster backplate by aligning it on guides. Press carefully and firmly to seat all electrical terminals. Install two lower floodlamp bulb and socket assemblies.
Position mask-and-lens assembly and install eight mask-and-lens attaching screws. Install lower trim panel. Install instrument cluster finish panel.