Fuel Gauge (Except Sable With Tachometer Cluster): Installation

Carefully position pointer parallel to rectangular raised portion of dial.
CAUTION: Excessive rough handling could disturb calibration.
Guide pointer carefully through slot in main dial. Position gauge on mounting bosses and install mounting screws. Tighten screws to 7-12 inch lbs. (0.8-1.4 N.m).
On column shift vehicles, install transmission selector indicator. Install main dial assembly to cluster backplate by aligning it on guides. Press carefully and firmly to seat all electrical terminals.
Position mask-and-lens assembly and install eight mask-and-lens attaching screws. Install instrument cluster finish panel.