Warning Indicator (Low Oil Level)

This system consists of a float-type sensor mounted to the side of the engine oil pan, an electronic control module and an instrument panel warning lamp. The warning lamp should come on during engine starting as a bulb prove out. When the ignition switch is turned to the RUN or START position, the control module determines whether the sensor is grounded (oil low) or ungrounded (oil not low).

If the oil level is adequate, the light will go out in RUN. If oil level is approximately 1.5 qts. (1.4L) or more low, the relay turns the warning lamp on. The lamp remains on until the oil level is no longer low, or the ignition switch is turned to the OFF position. After the ignition switch is turned to the OFF position, the module will reset for approximately five minutes. The delay allows time for oil drainback before another reading is allowed to occur. If the engine is restarted during this delay period, the last reading will be displayed.