LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1986 >> Bronco II 4WD, Automatic >> Repair and Diagnosis >> Suspension >> Front Suspension >> Suspension - Front (2WD Coil) >> Removal & Installation >> Stabilizer Bar >> Removal

Stabilizer Bar: Removal

  1. Disconnect left and right ends of front stabilizer bar from the link assembly attached to "I" beam bracket.
  2. Disconnect the retainer bolts and remove the stabilizer bar. Disconnect the stabilizer link assembly by loosening left and right lock nuts from "I" beam brackets.
scientia non olet · About LEMON Manuals