Wheel Bearing Adjustment
Tighten nut to 22-25 ft. lbs. (30-33 N.m) while turning rotor. Back off adjusting nut 1/8 turn. Install retainer and cotter pin without loosening nut any more. Bearing end play should be .001-.010" (.025-.254 mm).
Tighten nut to 22-25 ft. lbs. (30-33 N.m) while turning rotor. Back off adjusting nut 1/8 turn. Install retainer and cotter pin without loosening nut any more. Bearing end play should be .001-.010" (.025-.254 mm).