Drum Brake Shoes
NOTE:
This adjustment is made only after brake lining replacement or if brake applications are insufficient to actuate automatic adjuster.
- On all models with 7" brakes, use a measuring tool to determine drum diameter and proper shoe diameter. Hold automatic adjusting lever out of engagement while rotating adjusting screw. Adjust brakes shoes to fit gauge. Rotate gauge around shoe to ensure proper fit.
- Complete adjustment by applying brakes several times while backing vehicle, with forward movement after each application. Use a minimum 50 lbs. (22 kg) pressure on non-power brakes and 25 lbs. (11 kg) on power brakes.