LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1985 >> EXP 1.6 4, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Brake System Bleeding >> Manual Bleeding

Manual Bleeding

NOTE: Ensure that fluid level in master cylinder is adequate at all times during bleeding procedure.
  1. Fill master cylinder with clean brake fluid. Install bleeder hose to wheel assembly being serviced. Submerge other end of hose in clean glass jar partially filled with clean brake fluid.
  2. Depress brake pedal slowly through its full travel and hold. Open bleed screw 3/4-1 turn. Close bleed screw. Release brake pedal. Repeat procedure until brake fluid shows no signs of air bubbles.
scientia non olet · About LEMON Manuals