LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1983 >> Ranger 2.0 C >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL - VIN [C] & 2.3L 4-CYL - VIN [A] >> Removal & Installation >> Valve Spring Installed Height

Valve Spring Installed Height

  1. Valve spring installed height should be measured with rocker arms removed. Measurement should be made from cylinder head spring pad to top of valve spring retainer.
  2. If height is not within specifications, install .030" (.76 mm) spacers between cylinder head spring pad and valve spring. DO NOT  install more spacers than are necessary to obtain specified height.
VALVE SPRING INSTALLED HEIGHT SPECIFICATIONS

Application Measurement In. (mm)
2.0L 1.49-1.55 (37.8-39.4)
2.3L 1.53-1.59 (38.9-40.4)
scientia non olet · About LEMON Manuals