LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1983 >> Ranger 2.0 C >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL - VIN [C] & 2.3L 4-CYL - VIN [A] >> Removal & Installation >> Auxiliary Shaft >> Removal

Auxiliary Shaft: Removal

  1. Remove engine front cover. Release tension from timing belt. Remove fuel pump. Remove distributor assembly.
  2. Using auxiliary shaft/camshaft gear puller (T74P-6256-B or equivalent), remove gear from front of auxiliary shaft. Remove 2 bolts from auxiliary shaft retaining plate. Remove retaining plate.
  3. Carefully slide auxiliary shaft from engine. DO NOT  allow distributor drive gear or fuel pump lobe to contact bearing surfaces.
scientia non olet · About LEMON Manuals