LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1983 >> Ranger 2.0 C >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL - VIN [C] & 2.3L 4-CYL - VIN [A] >> Engine Cooling >> Water Pump >> Installation

Water Pump: Installation

Reverse removal procedure and note the following: Make sure that gasket surfaces are clean. Apply sealer (D8AZ-19554-A or equivalent) to water pump bolts prior to installation.

NOTE: For further information on cooling system capacities and other cooling system components, see ENGINE COOLING SYSTEM article in this section.
scientia non olet · About LEMON Manuals