LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1983 >> Ranger 2.0 C >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Disc Rotor (4WD Models) >> Removal

Disc Rotor (4WD Models): Removal

  1. Raise vehicle and support with safety stands. Remove wheel assembly. Remove locking hub assembly as outlined in Locking Hub article in DRIVE AXLE Section.
  2. Remove wheel bearing lock nut, and adjusting nut using a spanner (T59T-1197 for F100/250 and Bronco, T78T-1197-A for F350). Remove hub and disc assembly.
scientia non olet · About LEMON Manuals