LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1983 >> Ranger 2.0 C >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 2.8L V6 - VIN [S] >> Removal & Installation >> Valve Springs And/Or Valve Stem Oil Seals >> Removal

Valve Springs And/Or Valve Stem Oil Seals: Removal

  1. Remove air cleaner. Remove valve covers and rocker arm shaft. Remove spark plug wire and spark plug from cylinder in which valve spring will be removed.
  2. Remove both push rods from cylinder to be serviced. Install air line adapter in spark plug hole. Apply air pressure to cylinder.
  3. Using valve spring compressor tool (T74P-6565-A and B or equivalent), compress valve spring and remove spring retainer locks, spring retainer and spring. Remove valve stem oil seal.
scientia non olet · About LEMON Manuals