LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1983 >> Ranger 2.0 C >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 2.8L V6 - VIN [S] >> Removal & Installation >> Front Cover Oil Seal >> Installation

Front Cover Oil Seal: Installation

  1. Coat new front cover oil seal with Lubriplate. Slide oil seal and seal installer tool (T74P-6700-A or equivalent) onto crankshaft.
  2. Drive oil seal in until installer tool contacts front cover. Reverse removal procedure to complete installation.
scientia non olet · About LEMON Manuals