LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1983 >> Ranger 2.0 C >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 2.8L V6 - VIN [S] >> Removal & Installation >> Cylinder Head >> Removal

Cylinder Head: Removal

  1. Remove intake manifold. Remove rocker arm shaft assembly. Remove push rods and keep them in order so that they can be installed in their original positions.
  2. Remove exhaust manifolds. Remove cylinder head attaching bolts. Remove cylinder head from engine and discard gaskets.
NOTE: Cylinder head gaskets are marked with word "front" and "top" for correct installation positioning. Left and right gaskets are not interchangeable.
scientia non olet · About LEMON Manuals