LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1983 >> Ranger 2.0 C >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Panels - Standard >> Removal & Installation >> Instrument Cluster - Bronco II & Ranger >> Removal

Instrument Cluster - Bronco II & Ranger: Removal

  1. Disconnect battery ground. Remove 2 screws attaching steering column shroud to panel. Remove shroud. Remove lower instrument panel trim. Detach cluster trim cover attaching screws and remove cover. Remove 4 screws attaching cluster to panel. Position cluster slightly away from panel.
  2. Disconnect speedometer cable at speedometer. If there is not enough room, detach cable at transmission. Disconnect wiring harness connector from printed circuit. Disconnect any light bulbs from sockets and remove instrument cluster.
scientia non olet · About LEMON Manuals