LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1983 >> Ranger 2.0 C >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Driveshaft & Universal Joints >> Drive Shaft >> Adjustments >> Drive Shaft Phasing

Drive Shaft Phasing

Check that flanges on either end of drive shaft are in same plane. Often there are arrows on slip joint and drive shaft to aid in alignment. If flanges are not in same plane, disassemble universal joint and align.

Fig 1: View Showing Typical Slip Joint Alignment Arrows
G28875
NOTE: Align arrows to sides of seal retainer.
scientia non olet · About LEMON Manuals