LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1983 >> Ranger 2.0 C >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Drive Axle - Ifs Front >> Removal & Installation >> Pinion Yoke & Seal >> Removal

Pinion Yoke & Seal: Removal

  1. Disconnect drive shaft, and scribe a line down pinion shaft, yoke and nut. Remove nut and yoke. DO NOT  hammer yoke off. Damage to pinion gear, ring gear and bearing could result.
  2. Pry seal from bore, using care not to damage machined surfaces.
scientia non olet · About LEMON Manuals