LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1983 >> Ranger 2.0 C >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Steering Column Switches >> Turn Signals & Hazard Flashers >> Testing & Trouble Shooting >> Turn Signal & Hazard System >> Turn Signals Inoperative

Turn Signals Inoperative

  1. Turn on hazard system. If all lights operate, inspect for blown turn signal fuse or defective flasher. If fuse is blown, check for shorts between fuse and lamps. If turn signal fuse and flasher are satisfactory, check wire terminals in harness connector for continuity and power feed to and from switch.
  2. To determine if switch is bad, connect a known good switch in column to chassis connector and operate switch by hand. If signals now operate, replace switch.
scientia non olet · About LEMON Manuals