Crankshaft Main Oil Seal: Remove & Replace
WARNING: This page is about the Cutaway 4.9L Eng VIN E, which is a different variant/trim than selected.
NOTE 1: Upper Rope Type Seal includes pack and add only. Split lip type Seals include replacing top and bottom halves. If it is necessary to replace Upper Rope Seal, use Crankshaft - R&R.
NOTE 2: Circular One Piece Type Seal includes R&I Transmission and Flywheel.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| E350,In-Line6,Standard Trans, Rear | 2.5 | 1.6 | B | |
| Additional Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| In-Line6, Where Air Cond interferes add | 0.4 | 0.4 | B | |
| Where Pwr Strg interferes add | 0.3 | B | ||